We do concrete driveways.

A plain concrete driveway in Auckland typically costs around $90–$150 per square metre supplied and laid, with coloured and exposed aggregate finishes generally running $150–$250 per square metre. On top of the surface there's usually site prep - excavation, a compacted base, formwork and sometimes drainage or a vehicle crossing - so a standard residential driveway often lands between roughly $6,000 and $12,000+. The biggest cost driver is usually what's underneath, not the finish on top. We offer free, no-obligation on-site quotes so you get an accurate price for your specific site.

Most residential concrete driveways take about 2–4 days of on-site work, depending on size, site prep and weather. That covers excavation and base prep, boxing and reinforcing, the pour and finish, and tidy-up. The concrete then needs time to cure before use (see below).

We are concrete experts. This extends to concrete cutting, removal of existing concrete, measuring and digging out, boxing and preparation for the new driveway. We handle the entire process, start to finish.

We are perfectionists when it comes to our work and take drainage very seriously. We will ensure that your driveway installation is strategically planned with proper drainage and appropriate concrete thickness etc to optimise runoff and prevent pooling.

You can usually walk on it carefully after 24–48 hours, but you should keep vehicles off for about 7 days, and the concrete reaches full strength at around 28 days. Driving on it too early is the most common way new driveways get damaged, so it's worth the wait. We'll give you exact timeframes for your pour and the weather conditions on the day.

Plain concrete gives a smooth, clean grey finish and is the most affordable option, while exposed aggregate reveals the stones in the mix for a textured, decorative, skid-resistant surface. Exposed aggregate and coloured finishes cost more but add kerb appeal and grip. We can show you samples and recommend what suits your home and budget.

The driveway surface itself on your own property generally doesn't need building consent, but the vehicle crossing - the section between the road/kerb and your boundary - usually needs approval from Auckland Transport. Sloping sites, retaining walls above certain heights, or work near drainage may trigger additional consents. We help you understand what's required for your site as part of the quote, but always confirm specifics with Auckland Council / Auckland Transport.

A standard residential concrete driveway is usually around 100mm thick on a well-compacted base, with steel reinforcing mesh. Driveways carrying heavier vehicles (trucks, machinery, commercial use) need to be thicker - typically 125–150mm or more - and may require an engineered design. We spec the right thickness and reinforcing for how you'll actually use the driveway.

Yes - reinforcing (steel mesh, and sometimes fibre or rebar for heavier loads) is what controls cracking and gives the slab long-term strength. Skipping or skimping on reinforcing is a common shortcut that leads to early failure. Every driveway we pour is reinforced appropriately for its load and site conditions.

All concrete can develop fine surface cracks over time, but proper base preparation, reinforcing, and correctly placed control joints keep cracking to a minimum and largely cosmetic. Control joints are deliberate cuts that give the slab a controlled place to move so it doesn't crack randomly. Good preparation is the difference between a driveway that lasts decades and one that fails early.

A properly installed concrete driveway typically lasts 25–30 years or more with minimal maintenance. Longevity comes down to the base prep, reinforcing, concrete quality and drainage - all things we get right from the start. Occasional cleaning and resealing keeps it looking new.

In some cases yes, but it's usually better to remove the old surface and prepare a proper base, because pouring over a failing or uneven surface tends to transfer those problems into the new slab. We assess the existing driveway during the quote and recommend the most durable, cost-effective approach. We handle the removal and disposal as part of the job.

We provide concrete, asphalt and earthwork solutions across the wider Auckland region. We cover both residential driveways and large-scale commercial and agricultural work. Get in touch with your address and we'll confirm we cover your area.

Yes - we provide free, no-obligation on-site consultations and quotes. We come to your property, assess the site, talk through finishes and options, and give you a clear written price. There's no pressure and no charge to find out what your project will cost.

Concrete lasts longer (25–30+ years), needs less maintenance and offers more finish options, while asphalt is often a little cheaper upfront for larger areas but needs more upkeep over time. The right choice depends on your budget, the size of the area and the look you want. We install both and will give you an honest recommendation for your situation.

Yes - alongside plain concrete we offer coloured and exposed aggregate finishes that lift the look of your driveway, patio or path. These decorative options cost a bit more but add real kerb appeal and value. We can show you finished examples in our gallery and recommend what suits your property.

Concrete can be poured year-round in Auckland's mild climate; we simply plan pours around heavy rain and extreme temperatures, which can affect curing. The mild conditions mean weather rarely causes long delays. We monitor the forecast and schedule the pour for the best possible conditions.

Get in touch through our contact page, phone or email with your address and what you're after, and we'll book a free on-site consultation. From there you'll get a clear written quote, and once you're happy we'll schedule the work and keep you informed at every step. Most customers comment on how easy and communicative the whole process is.